how to fix a squeaky floor in a mobile home

To fix a squeaky floor in a mobile home, you’ll need to do a few things. First, you’ll need to determine the cause of the squeak. This can be done by simply standing on the floor in question and listening for an unusual noise. If you hear one, then you know where to start looking for loose nails or other issues that could be causing the problem.

Once you’ve determined where the noise is coming from, remove any nails or screws that are causing it. This can be done with a power drill and screwdriver bit if necessary, but it’s always best to use hand tools if possible so as not to damage your floors or walls more than necessary. If no screws or nails are visible on the surface of your flooring material, then skip this step and move onto step three instead (see below).

After removing any nails or screws that might have been causing your squeaks, use wood glue along with some clamps to hold everything together while it dries overnight (or longer). Make sure that all surfaces are thoroughly coated in glue before clamping them together!

Finally: wait until everything has dried completely before walking on it again!

how far apart are floor joists in a mobile home

The distance between floor joists in a mobile home depends on the width of the home, as well as how many bays it has.

A mobile home can be anywhere from 20 feet to 60 feet wide, so the spacing between joists will vary.

An average distance between joists is 16 inches, but it could be as little as 12 inches or as much as 24 inches depending on the model of mobile home and its size.

how much weight will a mobile home floor hold

Mobile home floors are designed to hold up to 2,000 pounds per square foot. However, this weight is only recommended for floors that have been treated with a special anti-rot and anti-termite treatment. If you are planning on having heavy items placed on your mobile home floor, it is important to get it treated before you put the items down.

what thickness plywood for mobile home floor

┬áThe thickness of plywood flooring for a mobile home depends on how it is laid. If you are using a floating floor, then a 3/4″ plywood would be sufficient. However, if you are using a solid-floor subfloor, then you would need to use 1″ thick plywood.

The reason for this is that the subfloor must be able to support the weight of the mobile home and its contents. A floating floor can be laid directly onto the ground without any additional support, but a solid-floor subfloor needs to be attached to joists or beams with fasteners in order to maintain structural integrity.

In addition to the thickness of plywood flooring for a mobile home, you should also consider choosing OSB (oriented strand board) instead of plywood because it is much more durable than plywood and will last longer under heavy loads such as those from furniture or appliances that people routinely move around inside their homes on a daily basis.