Installing a toilet in a concrete slab is a relatively easy project, but it does require some planning.
First, measure the area where you want to install your toilet and make sure there’s enough room for everything you’ll need to do.
Next, mark out the shape of your toilet on the floor with chalk. This will help you get an accurate measurement for all of your pipes and accessories. The distance from the center of one bolt hole to another should be around 5 inches (or more if your bolts are larger).
Then, prime and paint your floor so that it will be ready for tile or linoleum once the plumbing is done—and make sure it’s completely dry before installing anything else!
You’ll also want to check whether you have any nearby gas lines—they can cause problems if they’re not marked clearly enough before drilling holes into concrete slabs.
How to plumb a toilet in a concrete slab
- Install the closet flange and wax ring on the back of the toilet.
- Connect the supply lines from your supply valve to the shut-off valves for hot and cold water.
- Place a bucket or pan under the drain line to catch any spills or drips as you connect it to the drain pipe and then run it through the wall into the waste line.
- Make sure everything is level and tight before filling up your new toilet with water and flushing it for the first time!
is bamboo toilet paper safe for plumbing
The short answer is yes, bamboo toilet paper is safe for plumbing.
However, there are some things you should know before you use it:
Bamboo toilet paper does not break down as quickly as other kinds of toilet paper—it’s often made with a blend of bamboo and rayon. This means that it won’t disintegrate right away when exposed to water like other kinds of TP do. This can be a problem if you’re trying to unclog your toilet or drain, because the TP will just sit there until you remove it manually (or until it breaks down on its own).
You also need to make sure that any toilet paper in your pipes is flushed out every few months or so, so that buildup doesn’t occur and cause clogs or backups.
how to plumb a wall mounted toilet
Plumbing a wall-mounted toilet is an easy job, but it does require some specialized tools. Here’s how to do it:
First, you’ll need a sewer snake (available at your local hardware store) and a length of PVC pipe that matches the diameter of your drain pipe.
Next, you’ll need to measure out 4 inches from the back of your toilet and make a mark on the wall. This is where you’ll put the PVC pipe so that it sits flush with the wall.
Use the sewer snake to clear any obstructions from the P-trap in your toilet, then pressurize it by filling it up with water and pushing down on its handle until it forces all of its contents out through the drainpipe. Now use another length of PVC pipe (the same length as before) to connect your toilet’s drainpipe to this length of tubing—this will serve as a bypass around any blockages in your drains.
Once you’ve connected everything up correctly, turn on both valves at once—the one for your toilet tank and one for the sink—and let them run for several minutes so that all water runs out through those pipes before shutting off each valve individually
Why You Shouldn’t Use Liquid Plumber In Toilets
Liquid plumber is not meant for use in toilets, as it can cause damage to the seals that are necessary for proper operation of the toilet. This damage can lead to leaks and other issues with your toilet over time, so it’s important that any plumber who works on your plumbing system knows the difference between liquid plumber and the proper materials needed for each type of pipe or fixture.